Frost is a major abiotic stress and one of the principals limiting factors for agricultural production worldwide. Wind machines work in harmony with nature to absorb hot air into the garden or to increase the temperature and protect crops in the agricultural field.
There are two types of frost that can affect crops, advection and radiant. Advection frosts occur when cold air blows into an area to replace warmer air that was present before the weather change. It is associated with cloudy conditions, moderate to strong winds, no temperature inversion and low humidity.
Radiant frost events occur when plants and soil absorb the sunlight during the daytime then radiate and rise the heat during the night when cooler air moves in. Dense chilled air settles into the lowest areas of the canopy, where the most serious frost damage happens. The warmer air that rose above during the night is often trapped in a layer above the crops which is known as an inversion layer.
GENER wind machines perform heat transfer with forced convection as they pull the warmer air trapped down into the orchard and mix it with the cooler air down on the surface to raise temperatures and save crops.
Thus, transmission of air mass to a specific distance. Due to being able to rotate also in vertical axis, GENER wind machines circulate the air as to scan an area of 360 degrees and enable the wind movement. Gener Frost Guards consist of a tower, and engine placed in a sealed enclosure, a fuel tank, a control panel and a propeller on the tower. Wind machines have proven to be the most effective solution against frost damages.
When frost events occur, wind machines transmit hot air at a height of 14-15 m from the ground to the place where the frost is located, and provide air balance by combining the hot air with the cold air in the frost region. In this way, the ambient temperature increases and rotation is prevented. The wind machine has been produced in different sizes, at different heights and with different automation features. In order to prevent the animals from being adversely affected by vegetable and fruit cultivation in hot summer months, a wind machine is preferred in animal production areas.
The working principle of the wind machine is realized when the air moves to the tribune and the turbine blades start to rotate. With the rotation of the blades of the wind machine, the blades in the hub and the shaft connected to the junction area rotate. With the gearboxes, the rotational speed increases and kinetic energy is produced. The wind turbine turbine engine is the key element in the process of converting wind energy into electrical energy and meets the needs of the users to a large extent with its powerful and robust engine. The wind machine is used to prevent the frost events that occur as a result of the air falling below 0 degrees. In this way, you can reach your target production in a short time by increasing your agricultural production and efficiency with wind machines.
With the developing technologies, wind machines with advanced features produced by wind machine manufacturers meet the needs of farmers to a large extent. The wind machine, which is produced in different models by improving its features day by day, has won the appreciation of the users. Wind machine prices, which have both size and impact area and functionally advanced features, vary according to product features and model. In addition, the wind machine is equipped with the features of self-operation in bad situations by specially sensing the air temperature. It has energy-saving features in different models.
Web sitemizi geliştirmek, kullanışlı, etkili ve güvenli hale getirmek amacıyla çerezler (cookie) kullanmaktayız. Kullanmaya devam ettiğinizde çerezler ile toplanan kişisel verileriniz Çerez Politikamızda belirtilen amaçlar ve yöntemlerle mevzuatına uygun olarak kullanılacaktır.